RADR Quick StartGuidesUser guide

Lovense Controls

RADR supports Lovense Bluetooth devices with a simplified vibration-only control interface. This guide covers how to control Lovense devices.

Experimental

Lovense support is experimental. No Lovense device is confirmed on current RADR firmware, and some firmware versions fail to connect to Lovense toys. See Device Support for the status of each device and how to tell us what works.

Note

RADR provides vibration-only control for Lovense devices. Advanced features like heating, rotation, or device-specific patterns are not currently supported.

Supported Lovense Devices

Every Lovense device is listed as Experimental. See Device Support for the list.

If your Lovense device works with RADR, email support@researchanddesire.com with the device model and, if you can, a short video. That evidence lets us remove the Experimental label.

Control Screen Overview

When connected to a Lovense device, the control screen is simpler than the OSSM interface:

  • Left Encoder Dial: Vibration intensity control
  • Center Button: STOP button
  • Display: Shows vibration level and device status

Vibration Control

The left encoder controls vibration intensity.

ParameterRangeDefault
Vibrate0–160
  • Turn clockwise to increase intensity
  • Turn counter-clockwise to decrease intensity
  • Setting to 0 stops vibration

Info

RADR uses levels 0–16, not a percentage. Lovense toys accept levels 0–20, so RADR's level 16 is 80% of the toy's maximum.

Stop Button

The middle button acts as an immediate stop:

  • Press to set vibration to 0
  • The device stops vibrating immediately

Unlike the OSSM, there's no pause/resume state—simply increase the vibration level to restart.

Info

For reliability, RADR sends the stop command twice with a brief delay. This ensures the command is received even if the first transmission is lost due to Bluetooth interference.

Battery Level

RADR does not read the battery level of Lovense devices. Check the charge in the Lovense app before a session.

Connecting to Lovense Devices

Step 1: Prepare your Lovense device

Turn on your Lovense device. Ensure the Lovense app is closed on your phone—only one controller can connect at a time.

Step 2: Scan with RADR

Turn on RADR or select Device Search from the main menu. RADR scans for 5 seconds.

Step 3: Select your device

Your Lovense device appears in the device list. Select it with the right button to connect.

Step 4: Start controlling

Once connected, use the left encoder to control vibration intensity.

Warning

Close the Lovense phone app before connecting with RADR. Bluetooth devices can only have one active controller.

Limitations vs Native App

RADR provides basic vibration control. The following features are not available:

FeatureRADRLovense App
Basic vibrationYes (experimental)Yes
Battery levelNoYes
Vibration patternsNoYes
Remote partner controlNoYes
Sound-reactive modesNoYes
Alarm featuresNoYes
Device settingsNoYes
Firmware updatesNoYes

Tip

Use RADR when you want tactile, physical controls without a phone. Use the Lovense app for advanced features and remote play.

Quick Reference

ControlAction
Left EncoderAdjust vibration (0–16)
Right EncoderNot used
Left BumperNot used
Right BumperNot used
Left ButtonBack to main menu
Middle ButtonStop (set to 0)
Right ButtonNot used

Troubleshooting

Lovense device doesn't appear in scan

  • Ensure the device is powered on (LED blinking)
  • Close the Lovense phone app completely
  • Move RADR within 1–2 meters of the device
  • Power-cycle both devices and retry

Device connects but doesn't vibrate

  • Ensure vibration level is above 0
  • Check that the device has battery charge
  • Some devices need a few seconds after connection to initialize

Vibration is inconsistent

  • Reduce distance between RADR and the device
  • Move away from WiFi routers and other Bluetooth devices
  • Ensure no other apps are trying to connect

Tips

Tip

Start at a low intensity level (2–4) and gradually increase to find your preferred setting.

Tip

The encoder provides quick access to all 17 levels (0–16). You can rapidly scroll through intensities.

Op deze pagina