> ## Documentation Index
> Fetch the complete documentation index at: https://docs.researchanddesire.com/llms.txt
> Use this file to discover all available pages before exploring further.
# PitClamp Mini Reinforced Standard Base
> Assembly guide and bill of materials for the reinforced standard base variant of the PitClamp Mini
## Printing
Use these standard PitClamp Mini print settings for all components.
### Print settings
| Setting | Value |
| ----------------- | ------------------------------------- |
| Walls | 6 |
| Infill type | Cross Hatch or Gyroid |
| Infill percentage | 10% |
| Supports | Normal (Snug) with 3° threshold angle |
| Support placement | Allow supports on part |
| Seam | Nearest (or your preference) |
**Recommended filament:** PLA+ for optimal strength and durability.
All parts must print in the default file orientation. Printing Base components in other orientations causes structural weakness that may lead to failure under load.
### Print-in-place option
If your printer is well calibrated and your material has optimal layer adhesion, you can use the print-in-place Upper+Handle variant. Find this in the `/Non-Standard` folder.
## Bill of materials
This BOM is **per side**—double all quantities for a complete two-sided installation.
### Hinge pin hardware
| Quantity | Part |
| -------- | ---------------------- |
| 1x | M5x20 Socket Cap Screw |
| 1x | M5 Nut |
### Lever dogbones and handle
| Quantity | Part |
| -------- | ------------------------------- |
| 1x | M4x10 or M4x12 Socket Cap Screw |
| 2x | M4x25 Socket Cap Screw |
| 3x | M4 Nut |
### Lower reinforced base
| Quantity | Part |
| -------- | -------------------------------------------- |
| 1x | 77x16mm Flat Mending Plate (Straight Braces) |
| 2x | M5x16 Socket Cap Screw |
| 2x | M5 T-Nut |
**77x16mm plate compatibility:** These plates vary between manufacturers. Verify that:
* Holes are 5mm diameter to fit the M5 hardware
* Outer hole spacing is between 59mm and 61mm
## Pre-made kits
If you prefer a complete kit with printed parts and hardware, you can purchase one from the community:
Complete print and hardware kit available on Etsy
## Reference images
