> ## Documentation Index
> Fetch the complete documentation index at: https://docs.researchanddesire.com/llms.txt
> Use this file to discover all available pages before exploring further.
# Threaded Belt Clamp V2
> An improved belt clamp design that addresses printability and strength issues in the standard OSSM build
This is a proposed new standard part that addresses printability and strength issues in the current standard belt clamp design.
## Features
* **MGN12 rail compatibility**: Slotted design fits MGN12 linear rails
* **Wide belt support**: Pass-through accommodates belt widths up to 15mm
* **Universal thread tolerance**: Fine-tuned threading works with unmodified 24mm female threaded parts regardless of printer tolerance
## Assembly videos
Watch these videos to learn how to assemble and tension your belt clamp:
Learn how to attach the threaded end to your assembly.
Learn proper tensioning techniques for optimal performance.
## Required printed parts
Print the following components for a complete assembly:
| Part | Quantity |
| --------------------------------- | -------- |
| Threaded Belt Clamp - 24mm Thread | 1 |
| Threaded Belt Clamp - Clamp | 2 |
| Threaded Belt Clamp - Tensioner | 1 |
| 24mm Nut - Hex Flower | 2 |
| Tool - Hex Flower Wrench | 1 |
| 24mm Endcap - Hex Flower | 1 |
## Print settings
Print all parts without supports using OSSM standard settings.
| Setting | Value |
| -------------------- | ------------------------ |
| Walls | 6 |
| Infill | 15% crosshatch or gyroid |
| Supports | None |
| Estimated print time | \~3 hours |
| Estimated filament | \~85g |
## Bill of materials
### 24mm threaded clamp hardware
| Part | Quantity |
| --------------------------------- | -------- |
| M3x8 Socket Cap Screw (M3x12 max) | 1 |
| M3 Hex Nut | 1 |
### Tensioner hardware
| Part | Quantity |
| ---------------------- | -------- |
| M5x20 Socket Cap Screw | 1 |
| M5 Hex Nut | 1 |
## Purchase options
Purchase pre-printed parts and hardware kits from Etsy.