> ## Documentation Index
> Fetch the complete documentation index at: https://docs.researchanddesire.com/llms.txt
> Use this file to discover all available pages before exploring further.

# PitClamp Mini Bill of Materials

> Complete hardware list for building the PitClamp Mini mounting system, organized by component

## Latching Mechanism

| Quantity | Part                                |
| -------- | ----------------------------------- |
| 2        | M4x25 Socket Cap Head Bolt          |
| 1        | M4x12 or M4x10 Socket Cap Head Bolt |
| 3        | M4 Hex Nut                          |

<Note>
  If you use the print-in-place Upper+Handle variant (found in the Non-Standard folder), you can omit:

  * 1x M4x12 or M4x10 Socket Cap Head Bolt
  * 1x M4 Hex Nut
</Note>

## Bases

Select the base configuration that matches your setup.

<Tabs>
  <Tab title="Standard Base">
    ### Rear Hinge

    | Quantity | Part                       |
    | -------- | -------------------------- |
    | 1        | M5x20 Socket Cap Head Bolt |
    | 1        | M5 Hex Nut                 |

    ### Attaching Base to Extrusion

    | Quantity | Part                                                           |
    | -------- | -------------------------------------------------------------- |
    | 2        | M6x20 Socket Cap Head Bolt (M6x16 or M6x15 for 3030 Extrusion) |
    | 2        | M6 T-Nut                                                       |
  </Tab>

  <Tab title="Double Hinge Base">
    ### Rear Hinge

    | Quantity | Part                       |
    | -------- | -------------------------- |
    | 1        | M6x20 Socket Cap Head Bolt |
    | 1        | M6 Hex Nut                 |

    ### Front Hinge

    | Quantity | Part                       |
    | -------- | -------------------------- |
    | 1        | M6x20 Socket Cap Head Bolt |
    | 1        | M6 Hex Nut                 |

    ### Attaching Base to Extrusion

    | Quantity | Part                                                  |
    | -------- | ----------------------------------------------------- |
    | 2        | M6x20 Socket Cap Head Bolt (M6x15 for 3030 Extrusion) |
    | 2        | M6 T-Nut                                              |
  </Tab>
</Tabs>

## Mounting Rings

Select the ring that matches your motor.

<Tabs>
  <Tab title="57AIM">
    | Quantity | Part                                     |
    | -------- | ---------------------------------------- |
    | 4        | M5x35 Socket Cap Head Bolt               |
    | 4        | M5x20mm Hex Coupling Nuts OR M5 Hex Nuts |

    <Tip>
      Using M5 Hex Coupling Nuts (20mm) enables the optional rear motor cover with interlocking ridges. This is the recommended setup.
    </Tip>
  </Tab>

  <Tab title="iHSV57">
    | Quantity | Part                       |
    | -------- | -------------------------- |
    | 4        | M5x40 Socket Cap Head Bolt |
    | 4        | M5 Hex Nuts                |
  </Tab>

  <Tab title="42AIM">
    | Quantity | Part                       |
    | -------- | -------------------------- |
    | 4        | M3x16 Socket Cap Head Bolt |

    <Note>
      Bolt length may vary depending on your actuator body design.
    </Note>
  </Tab>
</Tabs>