Skip to main content

Documentation Index

Fetch the complete documentation index at: https://docs.researchanddesire.com/llms.txt

Use this file to discover all available pages before exploring further.

​
Function

The Power Switch Cap is an optional decorative cover that fits over the power switch toggle. This component:
  • Provides an aesthetically finished look to the power switch
  • Sits over the existing switch toggle
  • Purely cosmetic—not required for operation
SettingValue
Layer Height0.12mm
Walls4
Infill TypeGyroid
Infill Percentage25%
SupportsNone
This is a very small part. Print multiple copies or include it with other small parts like the buttons for efficiency.

​
Installation

1

Print the cap

Print the power switch cap using the settings above.
The cap is free of defects and has clean surfaces.
2

Press onto switch

Gently press the cap onto the power switch toggle. It should friction-fit in place.
Do not use adhesive unless the fit is too loose. A drop of CA glue can be used as a last resort.
3

Test operation

Verify the switch still operates smoothly with the cap installed.
Switch toggles on/off with no binding or interference.
This part is optional. The remote functions perfectly without it—the power switch is fully usable as-is.

​
Download Files

STEP File

Download for CAD editing

3MF Project

Bambu Studio project with print settings