Skip to main content

​
Latching Mechanism

If you use the print-in-place Upper+Handle variant (found in the Non-Standard folder), you can omit:
  • 1x M4x12 or M4x10 Socket Cap Head Bolt
  • 1x M4 Hex Nut

​
Bases

Select the base configuration that matches your setup.

​
Rear Hinge

​
Attaching Base to Extrusion

​
Mounting Rings

Select the ring that matches your motor.
Using M5 Hex Coupling Nuts (20mm) enables the optional rear motor cover with interlocking ridges. This is the recommended setup.