Skip to main content

Documentation Index

Fetch the complete documentation index at: https://docs.researchanddesire.com/llms.txt

Use this file to discover all available pages before exploring further.

RADR provides access to the OSSM’s built-in stroke patterns. Patterns are loaded directly from your OSSM when you connect, so the available patterns depend on your OSSM firmware version.

​
Accessing Patterns

To access Pattern Mode:
  1. Connect to your OSSM
  2. From the control screen, press the right button (Patterns)
  3. Use the right encoder to scroll through available patterns
  4. Press the right button to select a pattern
  5. Press the left button to cancel without changing
Patterns are loaded from your OSSM when you connect. The pattern list may vary depending on your OSSM firmware version.

​
Controls in Pattern Mode

ControlAction
Right EncoderScroll through patterns
Left EncoderAdjust speed (still works)
Right ButtonSelect the highlighted pattern
Left ButtonCancel and return to control screen
Middle ButtonPause and return to control screen
The speed control (left encoder) continues to work while in Pattern Mode, allowing you to adjust intensity while browsing patterns.

​
Available Patterns

RADR displays all patterns available on your connected OSSM. For detailed information about each pattern—including how the sensation parameter affects behavior—see the OSSM StrokeEngine documentation:

OSSM Stroke Patterns

Complete documentation for all OSSM stroke patterns, including Simple Stroke, Teasing or Pounding, Robo Stroke, Half’n’Half, Deeper, Stop’n’Go, Insist, and more.

​
Tips

Patterns work in combination with your speed setting. A pattern at 20% speed feels very different from the same pattern at 80% speed. Experiment with different combinations.
Start with Simple Stroke to get comfortable with the controls, then experiment with other patterns.
New patterns may be added through OSSM firmware updates. Check for firmware updates to access the latest pattern libraries.