Connect RADR to Another Supported Device
Check a non-OSSM, non-Lovense target's capability record, scan safely, and verify its documented control and Stop mapping.
- Locate the exact device in Supported Devices.
- Record the tested firmware, capabilities, limitations, and last-tested date. If any are missing, treat compatibility as unverified and contact support.
- Follow the target manufacturer's charging, inspection, positioning, cleaning, and safety instructions.
- Close every other app or controller that may hold the Bluetooth connection.
- Set RADR output to zero, power on the target, then scan from RADR.
- Select only an exact, expected device name.
- Without body contact, test the documented control at minimum output and verify Stop.
Unlisted does not mean compatible
Do not test an unlisted device on a person. Bluetooth discovery alone does not prove a correct or safe control mapping.
Use Device scanning for connection symptoms. Report unsupported or changed behaviour to support@researchanddesire.com.